Contact

Double Pay-off / Take-up Semi-automatic (Manual spool change-over)

PDS/TDS (080-100-125)

The machine offers a ‘semi-automatic’  (assisted) spool change.

The spool change procedure requires minimal operator intervention with reduced downtime and high efficiency.

Placing the spool and joining the cable is manual, all other procedures are automatic such as: pre-positioning the cable at the start of the new spool, cutting the cable, lifting the electric spool with the spool automatically positioned at the correct height, etc.

Features

  • 2x Cantilever pintle type.
  • Spool diameters ranging from Ø0,8m to Ø1,25m.
  • Main motors with encoders and independent ventilation.
  • Motorized simultaneous or independent Up/Down movement.
  • Precise traverse with servo motor and absolute encoder positioning
  • Air-conditioned electrical cabinet with Siemens PLC and 7" HMI.
  • Safety fences with interlocking doors.
  • Lenze Motors and drives.
  • Pintle shafts hardened steel.
  • Electrical cabinet mounted in machine frame.

Innovations

  • Limit torque control on spool descent movement.
  • Limit torque control at pintles closing movement.
  • Automatic traverse inversion positions are adjusted according to the HMI recipe.
  • Precise tension control dependent of instantaneous spool diameter.

Options

  • Diameter measurement sensor.

Specifications

Please select the machine size **

ParameterValue
MAXIMUM LOAD [kg]1000
MAXIMUM WIRE DIAMETER [mm]10
MAXIMUM LINEAR SPEED [m/min]1000
MAXIMUM CONSTANT TENSION [N]200
MOTOR POWER [kw]11
SPOOL WIDTH [mm]MIN. 250 | MAX. 600
SPOOL OUTER DIAMETER [mm]MIN. 400 | MAX. 800
MINIMUM INNER DIAMETER [mm]250
DIMENSIONS (L x W x H) [m]4,3 x2,3 x 2,1
ParameterValue
MAXIMUM LOAD [kg]1500
MAXIMUM WIRE DIAMETER [mm]15
MAXIMUM LINEAR SPEED [m/min]1000
MAXIMUM CONSTANT TENSION [N]250
MOTOR POWER [kw]15
SPOOL WIDTH [mm]MIN. 300 | MAX. 750
SPOOL OUTER DIAMETER [mm]MIN. 630 | MAX. 1000
MINIMUM INNER DIAMETER [mm]250
DIMENSIONS (L x W x H) [m]4,7 x2,4 x 2,3
ParameterValue
MAXIMUM LOAD [kg]2000
MAXIMUM WIRE DIAMETER [mm]20
MAXIMUM LINEAR SPEED [m/min]800
MAXIMUM CONSTANT TENSION [N]400
MOTOR POWER [kw]22
SPOOL WIDTH [mm]MIN. 350 | MAX. 1100
SPOOL OUTER DIAMETER [mm]MIN. 630 | MAX. 1250
MINIMUM INNER DIAMETER [mm]300
DIMENSIONS (L x W x H) [m]5,0 x2,4 x 2,4

Quotation request