Contact

Cantilever fixed reel Pay-Off/take-up

PCP/TCP (060 - 080 - 100 - 125 - 160 - 180)

This medium-capacity cable/rope winding system is specifically engineered for use in both pay-off and take-up operations involving medium-diameter cables and ropes. Its construction incorporates full electrical and standard spare parts design to minimize maintenance requirements. The pintle-type system is equipped with simultaneous motorized spool lifting capabilities. This machine guarantees precise tension control while adapting to varying cable diameters and spool specifications with an accuracy of 1N.

PCP/TCP (060 - 080 - 100)
PCP/TCP (060 - 080 - 100)
PCP/TCP (125 - 160 - 180)
PCP/TCP (125 - 160 - 180)

Features

  • Cantilever pintle type.
  • Spool diameters ranging from Ø0,6m to Ø1,8m.
  • Main motor with encoder and independent ventilation.
  • Hydraulic simultaneous Up/Down movement.
  • Simultaneous or independent motorized Open/Close movement with motor disk brake​.
  • Precise traverse with ball screw and servo motor with absolute encoder position.
  • Air-conditioned electrical cabinet with Siemens PLC and 7" HMI.
  • Safety fences with interlocking door.
  • Lenze Motors and drives.
  • Pintle shafts hardened steel.
  • Electrical cabinet mounted in machine frame.

Innovations

  • Limit torque control on spool descent movement.
  • Limit torque control at closing movement.
  • Automatic traverse inversion positions are adjusted according to the HMI recipe.
  • Precise tension control dependent of instantaneous spool diameter.

Options

  • Diameter measurement sensor.
  • Dancer control.
  • Simple and future possibility of traverse unit connection.
  • Film dispenser.

Specifications

Please select the machine size **

ParameterValue
MAXIMUM LOAD [kg]600
WIRE/CABLE DIAMETER [mm]1-20
MAXIMUM LINEAR SPEED [m/min]500
CONSTANT TENSION [N]20-300
MOTOR POWER [kw]7,5
SPOOL WIDTH [mm]MIN. 250 | MAX. 475
SPOOL OUTER DIAMETER [mm]MIN. 360 | MAX. 600
MINIMUM INNER DIAMETER [mm]100
DIMENSIONS (L x W x H) [m]1,5 x 1,5 x 1,15
ParameterValue
MAXIMUM LOAD [kg]1000
WIRE/CABLE DIAMETER [mm]1-25
MAXIMUM LINEAR SPEED [m/min]500
CONSTANT TENSION [N]40-500
MOTOR POWER [kw]9
SPOOL WIDTH [mm]MIN. 250 | MAX. 600
SPOOL OUTER DIAMETER [mm]MIN. 360 | MAX. 800
MINIMUM INNER DIAMETER [mm]200
DIMENSIONS (L x W x H) [m]1,7 x 1,7 x 1,3
ParameterValue
MAXIMUM LOAD [kg]2000
WIRE/CABLE DIAMETER [mm]2-30
MAXIMUM LINEAR SPEED [m/min]500
CONSTANT TENSION [N]50-700
MOTOR POWER [kw]11
SPOOL WIDTH [mm]MIN. 300 | MAX. 750
SPOOL OUTER DIAMETER [mm]MIN. 400 | MAX. 1000
MINIMUM INNER DIAMETER [mm]200
DIMENSIONS (L x W x H) [m]2,2 x 2,1 x 1,4
ParameterValue
MAXIMUM LOAD [kg]3000
WIRE/CABLE DIAMETER [mm]3-35
MAXIMUM LINEAR SPEED [m/min]400
CONSTANT TENSION [N]50-700
MOTOR POWER [kw]15
SPOOL WIDTH [mm]MIN. 300 | MAX. 950
SPOOL OUTER DIAMETER [mm]MIN. 400 | MAX. 1250
MINIMUM INNER DIAMETER [mm]250
DIMENSIONS (L x W x H) [m]2,4 x 2,5 x 1,9
ParameterValue
MAXIMUM LOAD [kg]4500
WIRE/CABLE DIAMETER [mm]4-40
MAXIMUM LINEAR SPEED [m/min]400
CONSTANT TENSION [N]30-400
MOTOR POWER [kw]15
SPOOL WIDTH [mm]MIN. 400 | MAX. 1180
SPOOL OUTER DIAMETER [mm]MIN. 600 | MAX. 1600
MINIMUM INNER DIAMETER [mm]250
DIMENSIONS (L x W x H) [m]2,8 x 2,65 x 2,11
ParameterValue
MAXIMUM LOAD [kg]6000
WIRE/CABLE DIAMETER [mm]4-50
MAXIMUM LINEAR SPEED [m/min]300
CONSTANT TENSION [N]30-400
MOTOR POWER [kw]22
SPOOL WIDTH [mm]MIN. 400 | MAX. 1320
SPOOL OUTER DIAMETER [mm]MIN. 600 | MAX. 1800
MINIMUM INNER DIAMETER [mm]250
DIMENSIONS (L x W x H) [m]3,0 x 2,8 x 2,3

PCP/TCP 060, 080, 100 :

  • Motorized simultaneous Open/Close movement with motor disk brake​.
  • Operation with normal and NPS spools (mechanical and software adaptation).

PCP/TCP 125, 160, 180 : 

  • Motorized simultaneous or independent Open/Close movement with motor disk brake​.

Quotation request